Huge memory and USB connectivity. Instrument for the measurement of noise according to OSHA, MSHA, NIOSH, ACGIH, DoD, etc.
- Projection of parameters; evaluation of exposure to noise for measurement times shorter than the exposure time
- Great storage capacity; saves the time history of the measurement
- USB connectivity & power
- Dosimeter conforms to standard ANSI S1.25-1991 class 2
- Easy to program: double threshold level, exchange rate, criterion level, frequency and time-weighting
- Applications: Measurement of noise according to OSHA, MSHA, NIOSH, ACGIH, DoD, etc.
The DC112d is a high performance dosimeter and the ideal instrument for measuring noise according to Directive 2003/10/CE. It adapts to technical progress and is perfect for health & safety requirements regarding the exposure of workers to the risks arising from noise.
The DC112d enables you to measure simultaneously all the parameters needed to assess the levels of noise to which workers are exposed ,with and without, hearing protectors (SNR and HML). The DC112d, measures the equivalent level with A and C frequency-weightings [ LAt, LCt ] (SNR and HML method). And, of course, the Peak Level with C frequency weighting [LCpeak] is also available.
The DC112 enables you to assess and measure exposure to noise and also brings you all the data needed to inform and train workers with regard to the significance and potential risks arising from the results of the measurement and assessment.
Moreover, It helps you to design and run a reduction program and to choose the most suitable hearing protectors.
Standards and certificates
Table of standards
- EN 61252:1995
- /A1:2001 Sound exposure meter
- IEC 61252:2002
- Sound exposure meter
- Minimum health and safety requirements regarding the exposure of workers to the risks arising from physical agents (noise)
- Complies with 73/23/CEE and CEM 89/336/CEE low-tension regulations, the latter amended by 93/68/CEE.
- 2008-03-12: Type examination
CAPTURE Studio provides you with a convenient, easy-to-use environment for obtaining digital data acquired by the instrument.
CAPTURE Studio has been designed as a work environment for the new range of CESVA products. Software available for Cesva sound level meters, vibrometers and dosimeters.
CESVA Capture Studio
CAPTURE Studio is a comprehensive software application that allows you to: configure all the parameters of the instrument on just one screen, retrieve & display data from the instrument in real time (increasing the capacity of the registers because it is limited by the available memory of the PC), download registers from the instrument memory to a PC, erase the instrument memory (so the instrument will be empty & so you will have the full capacity to save the new measurements), display the data files graphically and numerically, convert them into different formats (.txt, .xls, .mdb), copy the graphic and numeric information supplied by the software (to create personalized reports) and save the files in its own *.ccf format (which then cannot be changed and guarantees their total integrity and legality).
Set consisting of: DC112d, CB004 Sound level calibrator, TR040 tripod, ML040 transporting briefcase
Set consisting of: DC112d, CB004 Sound level calibrator, ML010 transporting briefcase
Set consisting of: DC112d, CB004 Sound level calibrator, TR040 tripod, ML060 transporting briefcase
Tripod for sound level meter, dosimeter and microphone. Maximum height 1.1 meters.
Tripod for sound level meter, dosimeter and microphone. Maximum height 1.55 meters.
Briefcase (39 x 32 x 12 cm)
Briefcase (48 x 37 x 16 cm)
Special outdoors briefcase (51 x 38 x 15 cm) for Sound Level Meter / Dosimeter / Vibrometer, Sound Calibrator and Tripod
Battery converter 12 V to 9 V
Rechargeable 9 V 200 mA battery
Charger for 9 V 200 mA batteries
Mains power feeder with USB